DUOTONE KITEBOARDING the world's largest kite brand and DUOTONE WINDSURFING Windsurf Riggs market leaders have joined forces to develop the most innovative rig ever. The result - the first inflatable surf sail - is the best of both worlds: incredibly low weight and packing dimensions achieved with kite technology combined with the attractiveness and safety of a windsurf rig. The iRIG makes learning to windsurf a piece of cake, as the inflatable sail is a whopping 70% lighter than a conventional windsurf rig. A heavy traditional rig (if not constantly kept in its balanced position) though generates a lot of leverage which literally lifts or pushes the rider out of position ending up in the water. And even the biggest board won’t be able to avoid that. So the only solution to an instant learning success without falling into the water is a stable board in combination with the unbeatable low weight of the iRIG. On top the feather-light weight and the ability to float onto the water make starting a piece of case as you can literally lift the iRIG out of the water with just two fingers. Since the iRIG is not only ultra light but also comes without any hard materials, the risk of injury is reduced dramatically. As well you don’t have to fear drifting off wind anymore. Since the whole rig floats on the water without any additional water resistance even paddling back home means no extra effort.
An inspiring (r)evolution – the POWER.XT 2.0 can do much more and do it better than the previous model. And as POWER.XT 2.0 AERO RDM 34 it is also the most lightweight ratchet extension of all time! Beyond the basic idea, the POWER.XT 2.0 has almost nothing in common with the previous model any more. From the extremely solid ratchet mechanism plus lever to the simplified release mechanism, the high-strength Lyros® Dyneema harness downhaul lines and the option to retrofit the damper function – everything has been radically upgraded. For many years, the POWER.XT has been the benchmark when it comes to extensions with trimming tools. Those who use it will never want to do without it again. Thanks to the integrated lever, it overcomes even the strongest downhaul forces, enabling perfect re-trimming or fine-tuning even when on the water. Even children could handle the extreme luff tension of modern slalom sails, each profile can be adjusted to millimetre precision in a matter of seconds. The 15 cm long lever and the ratio of 1:60 enable trimming without any noticeable effort.
70% carbon content for a highly balanced price/performance ratio. All SILVER.70 masts boast a strikingly impressive overall performance and low weight, which is only achieved through the use of the highest-quality carbon and processing using the sophisticated AEROSPACE PREPREG TECHNOLOGY. All RDM versions are technologically the finest needle masts with the dynamic advantages afforded by its slim shape (RDM adapter not included). The white POLY.SHIELD coating of the base prevents any scratches or potential wear, in addition to thermal overload. And additional windings near the boom prevent any kind of slippage. Provided you registered straight after purchase, we offer a two-year unlimited warranty, otherwise only statutory claims will be possible.
Lowest design, extreme durability So that the iBASE 2.0 can be installed or removed without the need for tools, it has been designed to include a central screw. Although these designs are normally built relatively high, our engineers have found a solution for making the iBASE 2.0 the lowest base of its kind. Because there is nothing in the way, the risk of injury to feet and toes is kept to a minimum. In contrast to conventional mastfoot bases made of Zytel plastic, the iBASE 2.0 is the only one produced using a much stiffer material known as POM, thus improving the durability. One for all – just one base for all conditions We are 100% convinced that absolutely no-one in any conditions and for any discipline needs more than one base. The high flexibility and ease of installation and removal makes the need for multiple bases and different systems simply obsolete. This is why we only offer the iBASE 2.0. All these additional features do not lead to any additional weight – something other bases in the market cannot claim to achieve! Release option We have always been annoyed having to unscrew the base from the board after the surf session with tired hands, just so the board fits into the board bag. For this problem in particular the iBASE 2.0 features a useful release option for removing the connection joint by simply pulling the sand-resistant, stainless-steel U-pin. Without the need for tools, you can also swap this for a different model in a matter of seconds depending on your preferences. An additional advantage of this feature is that with a replacement joint/tendon you are immediately ready for action again when worst comes to worst – without having to go through the effort of repairing the joint/tendon. Even safer A) For all safety nuts, the release button can now be fixed with a screw (PERMA LOCK OPTION), thus inhibiting the release function. B) Should the iBASE 2.0 ever become stuck to the board after long storage times, two holes now allow you to use a screwdriver as a lever to release the base with ease.
UNI.XT – the most technically advanced and yet the most lightweight standard aluminium extension we have ever built. Now also built using AERO carbon technology to create the most lightweight extension in the world.
When it comes to standard extensions, everyone has probably experienced some nasty surprises at some point. They rarely fit with the rope alignment on the sail, most of them need high downhaul forces, and more often than not the mechanism for adjusting the height is extremely fiddly. Before designing the UNI.XT we analysed all of these issues in detail and came up with workable solutions. The strong and super-solid UNI.XT extension may look like numerous other standard extensions at first glance, yet it is replete with innovations which make it a far superior product. The latest version comes with a completely new adjustment ring, which offers a unique feature: based on the tried-and-tested SDM adjustment ring, the RDM version now for the first time ensures that the aluminum tube does not come into contact with the mast anymore, which avoids any contact corrosion. No other RDM extension can offer that! In order to guarantee the same durability despite the reduced diameter, a double-walled construction of 7075 aluminum outer tube and ovalized T8 inner tube is used (patent pending).
An inspiring (r)evolution – the POWER.XT 2.0 can do much more and do it better than the previous model. And as POWER.XT 2.0 AERO RDM 34 it is also the most lightweight ratchet extension of all time! Beyond the basic idea, the POWER.XT 2.0 has almost nothing in common with the previous model any more. From the extremely solid ratchet mechanism plus lever to the simplified release mechanism, the high-strength Lyros® Dyneema harness downhaul lines and the option to retrofit the damper function – everything has been radically upgraded. For many years, the POWER.XT has been the benchmark when it comes to extensions with trimming tools. Those who use it will never want to do without it again. Thanks to the integrated lever, it overcomes even the strongest downhaul forces, enabling perfect re-trimming or fine-tuning even when on the water. Even children could handle the extreme luff tension of modern slalom sails, each profile can be adjusted to millimetre precision in a matter of seconds. The 15 cm long lever and the ratio of 1:60 enable trimming without any noticeable effort.
So that the iBASE 2.0 can be installed or removed without the need for tools, it has been designed to include a central screw. Although these designs are normally built relatively high, Duotones engineers have found a solution for making the iBASE 2.0 the lowest base of its kind. Because there is nothing in the way, the risk of injury to feet and toes is kept to a minimum. In contrast to conventional mastfoot bases made of Zytel plastic, the iBASE 2.0 is the only one produced using a much stiffer material known as POM, thus improving the durability.
One for all – just one base for all conditions We are 100% convinced that absolutely no-one in any conditions and for any discipline needs more than one base. The high flexibility and ease of installation and removal makes the need for multiple bases and different systems simply obsolete. This is why Duotone only offer the iBASE 2.0. All these additional features do not lead to any additional weight – something other bases in the market cannot claim to achieve! Release option We have always been annoyed having to unscrew the base from the board after the surf session with tired hands, just so the board fits into the board bag. For this problem in particular the iBASE 2.0 features a useful release option for removing the connection joint by simply pulling the sand-resistant, stainless-steel U-pin. Without the need for tools, you can also swap this for a different model in a matter of seconds depending on your preferences. An additional advantage of this feature is that with a replacement joint/tendon you are immediately ready for action again when worst comes to worst – without having to go through the effort of repairing the joint/tendon. Even safer A) For all safety nuts, the release button can now be fixed with a screw (PERMA LOCK OPTION), thus inhibiting the release function. B) Should the iBASE 2.0 ever become stuck to the board after long storage times, two holes now allow you to use a screwdriver as a lever to release the base with ease.
Fast installation without removing the tail-end + Length specific construction to always ensure correct degree of swing + Low-stretch rope with 2mm high-density PU tubing for maximum longevity + Inside rubber patch avoids twisting on the boom tube
TheChinook Sailing 80% Carbon SDM Mastis the perfect mast to power up your rig. Eight percent carbon construction is very strong with excellent performance characteristics. Special off-axis carbon fiber is used in critical areas. Constant curve bend characteristics work perfectly with the majority of sails on the market.
The Chinook Sailing40% Carbon SDM Mast will rig your sail how it was designed and provide years of performance without breaking the bank. Constant curve bend characteristics work perfectly with the majority of sails on the market. Forty percent carbon content provides excellent reflex response to maintain desired sail shape. Remaining composite material further increases durability.
TheChinook Sailing 80% Carbon SDM Mastis the perfect mast to power up your rig. Eight percent carbon construction is very strong with excellent performance characteristics. Special off-axis carbon fiber is used in critical areas. Constant curve bend characteristics work perfectly with the majority of sails on the market.
The Chinook Sailing40% Carbon SDM Mast will rig your sail how it was designed and provide years of performance without breaking the bank. Constant curve bend characteristics work perfectly with the majority of sails on the market. Forty percent carbon content provides excellent reflex response to maintain desired sail shape. Remaining composite material further increases durability.
The Chinook Sailing 60% Carbon Fiber 2-piece RDM Mast offers sailers an economical and high performance mast. The constant curve bend characteristics work perfectly with the majority of sails on the market. Sixty percent carbon content provides excellent reflex response to maintain desired sail shape. Remaining composite material further increases durability.
All SILVER booms are made from 7075 high-tech aluminium in high-quality BONDED TECHNOLOGY. This material used predominantly in cycling gives the tubes significantly more stiffness. There is also the new combination of a round tube in the front area (holding forces act obliquely downwards, so it is stiffer around here) and the OVAL TAIL SECTION (horizontal sail pull, thus the oval tube is stiffer here). This makes the entire SILVER around 30% stiffer. Together with the hardened front arch, this results in enormous hardness and durability. We are even prepared to offer a two-year unlimited warranty on all SILVER models – even for bending! The wave-oriented SILVER models consist of three segments and have a one-piece aluminium rear arch in addition to the intelligent iFRONT 2.0 front end. Together with the RDM tubes at 28 mm, this creates the ideal combination of stiffness and comfort. The bend curve applies an even pull on the mast- and backhand. The lengths 180 and 200 cm with performance bend curve are specifically for freeride sails and a 30 mm tube diameter to ensure maximum stiffness. The entire SILVER line is equipped with the iTAIL WAVE tail end, whose patented Loop-Loop-Go 2.0 system for the first time guarantees absolutely perfect rope alignment. The solid PROTECTION GRIP coating on the outside effectively prevents damage to the coating when rigging up.
TheChinook Sailing 152-214cm Sport Boomis an incredible value loaded with versatility. The extension range fits a wide range of sails and the boom head will fit both standard diameter and reduced diameter masts without the need for a shim.
The parallel rail concept delivers serious freeride performance, combining effortless speed with pure gybing pleasure. Just like its Stubby Wave siblings, the narrower width compared to equivalent freerideboards gives the Blast an increased level of efficiency. The wider nose and pulled in tail offer blistering acceleration, but also a stable platform to drive from, giving you tons of speed and control over chop. Push as gentle or as hard as you want in the corners, and the Blast responds immediately to bring you out the far side with ease. Performance has never come so easy!
The Chinook Sailing Carbon US Cup-RDM-Short 20cm Extension is elegant and very strong. A new easy to use Composite Snap Collar system eliminates lost pins or collars and can be quickly adjusted with one hand. All extensions come with the proven US Power-Haul pulley and cleat system and 2 cm adjustment increments.
The Chinook Sailing Aluminum US Cup-SDM-Short 12cm Extension uses our new Six Pin collar for easy and solid adjustment. The anodized logo/index markings are one of the many unique and innovative features that make these the most popular extensions on the market. Comes standard with the proven US Power-Haul pulley and cleat system and 2 cm adjustment increments.
The Chinook Sailing Aluminum Euro Pin EX-RDM-Medium 28cm Extension uses custom alloy and bell shaped tubing to provide the best weight to strength ratio available in aluminum construction. The new, easy to use Composite Snap Collar system eliminates lost pins or collars and can be quickly adjusted with one hand. All come with the proven Euro-Pin EX Power-Haul pulley and cleat system and 2 cm adjustment increments.
Adds maximum of 28cm to mast length
Reduced Diameter
Euro-Pin EX
Stainless steel button engages three sides of Euro-Pin for safer attachment
The Chinook Sailing Aluminum US Cup-RDM-Medium 28cm Extension uses custom alloy and bell shaped tubing to provide the best weight to strength ratio available in aluminum construction. The new, easy to use Composite Snap Collar system eliminates lost pins or collars and can be quickly adjusted with one hand. All come with the proven US Power-Haul pulley and cleat system and 2 cm adjustment increments.
The Chinook Sailing Aluminum Euro Pin EX-SDM-Tall 48cm Extension uses our new Six Pin collar for easy and solid adjustment. The anodized logo/index markings are one of the many unique and innovative features that make these the most popular extensions on the market. Comes standard with the proven Euro Pin EX Power-Haul pulley and cleat system and 2 cm adjustment increments.
TheChinook Sailing Aluminum US Cup-SDM-Tall 48cm Extension uses our new Six Pin collar for easy and solid adjustment. The anodized logo/index markings are one of the many unique and innovative features that make these the most popular extensions on the market. Comes standard with the proven US Power-Haul pulley and cleat system and 2 cm adjustment increments.
Complete rig designed to make learning to windsurf easy. Dacron material for superior durability against wear and UV rays. Comes with Ezzy built sail, 2-piece epoxy, Chinook Kid or Sport boom, mast base, mast extension, and uphaul. Now being used as a very capable SUP rig, "SHIFT" your SUP into high gear! Kid size Trainers 2.0, 2.5, 3.0 Adult Trainers 3.5, 4.0, 4.5, 5.0 White/Blue/Black (colors may vary)
Sign up and save
Stay up to date with deals and tips throughout the season.