Foil Boards

To begin with, the X-Series features include an extra layer of bamboo on top & bottom to increase overall board stiffness. A 3K carbon layer is then placed on top to reinforce the standing zone, as well as Foot Strap inserts for those riders that require them for various tricks. (Foot Straps optional) There is also 3k carbon over the foil mount for increased strength and durability.

The “Duck Bill” nose is so you ride a shorter board that has less rail shape up front and recovery a lot easier if you porpoise, the Pintail allows for quick release from the waters surface when Foiling, or smooth bottom turns when Wake Surfing.

A 3D diamond pattern deck pad offers excellent grip, and the raised “northern star” to indicate rear foot position when Foiling.

Each board is constructed with an industry leading “Stinger Foil Mount” which is a pre-installed 90mm wide foil mount, using 3K Carbon on top as well as the sides of the boxes for toque reinforcement of the US Fin boxes. These boxes allow for infinite foil positioning so you can dial in the balance point of your board and foil when mounted.

Every Stinger Foil board is equipped with an industry leading “Stinger Foil Mount” which is pre-installed using US Fin boxes, so you can take flight with a “Stinger Foil” whenever desired.

All Stinger Boards include a bag for UV protection, a protective fin pouch, and two foil mount plugs for a smoother wave ride when not foiling.

The Sky Wing is our dedicated board range for Wing Foiling. The ultra-compact shapes feel minimal when in flight mode but are loaded with volume for an easy start and maximum stability while floating. Everything about the Sky Wing boards has been optimised for Wing Foiling. The compact shapes are split in two directions: The two smaller models have their focus from freeride to waves, with a curvier rocker line, forgiving bevelled rails and deep double concaves creating a flat section for early going and smooth touch downs at the same time. The 5’4” and the latest additions 5’8” and 6’0” are focussed on the earliest take-off possible with minimal board size, but plenty of volume. The flat rocker delivers maximum glide needed for a quick flight in light winds. The 5’8” and 6’0” feature bevelled rails and a step tail to reduce the surface area for a quick and clean release of boards that size. The Sky Wing is exactly what you want for Wing Foiling! Much more compact than a SUP foilboard, yet still easy enough to start and get up and out of the water.

THE "UTILITY" OPTION FOR ALL OF YOUR BEHIND THE BOAT NEEDS **FOIL NOT INCLUDED**

Hyperlite's new utility wakesurfer is appropriately named the UTE. The UTE wakesurfer does it all as you can attach your preferred foil for foil boarding, add foot straps for more control while foiling or wakesurfing or simply ride as you would any other Hyperlite Durashell Surfer. Featuring their Reinforced DuraShell Constructions the UTE is super durable and will stand up to the rigors thrown its way. With max volume packed into each size the UTE is great for all surfers whether just beginning or honing in advanced skills. Shaped by Butch, the UTE was designed with true surfing in mind while also functioning as a foil board or strap surfer.

TECH DETAILS

A dedicated SUP and Wing foil board

After a few proto-types testing and working with their counterpart Kahuna Paddleboards iSUP factory for the last 18 or so months, Stinger were able to create their iSUP Foil Board, appropriately named the “Traveller.” Dedicated to Foiling in Surf, SUP or Wind-Wind disciplines.

Not only can you fit the board into the bag, you’ll find foil storage provisions on the underside of the top flap to hold your Stinger Devil-ray Foil, and still enough room to put your wing in as well.

They use a 90mm slotted “Carbon Foil Plate” which help reduce the overall weight and the carbon plate provides a direct transfer to the foil.

The “Traveller” can be ridden with or without foot straps, provisions are installed so when you get to that level, you can go large.

Along with the iSUP Board, a dual action hand pump, travel wheelie bag and leash are included.

At 5’2” & 99 litres, you’ll be able to go Foiling anywhere, happy travels.

Boasting an all new state of the art layup, the new Dwarf Craft range is even lighter than its predecessors. Decreased size & weight have increased the board’s responsiveness, agility, and direct feeling. Slingshot have also maximized the board’s nose rocker to help the touch and go performance of this new shorter profile. For riders wanting the pinnacle of foil board carving, leverage and control for pumping, and the ultimate ease of travel, the Dwarf Craft 100 should be in your future.

The Dwarf Craft 110 is perfect for the intermediate riders who are looking for the perfect blend of performance and comfort in a progressive foil board shape. Boasting an all new state of the art layup, the new Dwarf Craft range is even lighter than its predecessors. If you are looking for great carving and control in a lightweight package but aren’t looking to sacrifice stability and buoyancy, then the Dwarf Craft 110 is the perfect foil board for you.

Featuring just enough length and the perfect volume for intermediate rider and plenty of high performance features for the advanced riders, the Dwarfcraft 120 is the ultimate free ride foil board that you can use no matter your skill level. Boasting an all new state of the art layup, the new Dwarf Craft range is even lighter than its predecessors. The Dwarf Craft 120 is light, nimble and full of advanced features, but retains the size and volume of a user friendly setup, making this the perfect shape to progress on and never outgrow.

Package Includes:

Dwarfcraft Board, Foil Pedestal Mounting Hardware

 SPECS

To begin with, the X-Series features include an extra layer of bamboo on top & bottom to increase overall board stiffness. A 3K carbon layer is then placed on top to reinforce the standing zone, as well as Foot Strap inserts for those riders that require them for various tricks. (Foot Straps optional) There is also 3k carbon over the foil mount for increased strength and durability.

The “Duck Bill” nose is so you ride a shorter board that has less rail shape up front and recovery a lot easier if you porpoise, the Pintail allows for quick release from the waters surface when Foiling, or smooth bottom turns when Wake Surfing.

A 3D diamond pattern deck pad offers excellent grip, and the raised “northern star” to indicate rear foot position when Foiling.

Each board is constructed with an industry leading “Stinger Foil Mount” which is a pre-installed 90mm wide foil mount, using 3K Carbon on top as well as the sides of the boxes for toque reinforcement of the US Fin boxes. These boxes allow for infinite foil positioning so you can dial in the balance point of your board and foil when mounted.

Every Stinger Foil board is equipped with an industry leading “Stinger Foil Mount” which is pre-installed using US Fin boxes, so you can take flight with a “Stinger Foil” whenever desired.

All Stinger Boards include a bag for UV protection, a protective fin pouch, and two foil mount plugs for a smoother wave ride when not foiling.

The X-Series Collection of Wake Surf Foil Boards are true dual purpose boards that you can Foil on or Wake Surf. 

To begin with, the X-Series features include an extra layer of bamboo on top & bottom to increase overall board stiffness. A 3K carbon layer is then placed on top to reinforce the standing zone, as well as Foot Strap inserts for those riders that require them for various tricks. (Foot Straps optional) There is also 3k carbon over the foil mount for increased strength and durability.

The “Duck Bill” nose is so you ride a shorter board that has less rail shape up front and recovery a lot easier if you porpoise, the Pintail allows for quick release from the waters surface when Foiling, or smooth bottom turns when Wake Surfing.

A 3D diamond pattern deck pad offers excellent grip, and the raised “northern star” to indicate rear foot position when Foiling.

Each board is constructed with an industry leading “Stinger Foil Mount” which is a pre-installed 90mm wide foil mount, using 3K Carbon on top as well as the sides of the boxes for toque reinforcement of the US Fin boxes. These boxes allow for infinite foil positioning so you can dial in the balance point of your board and foil when mounted.

Every Stinger Foil board is equipped with an industry leading “Stinger Foil Mount” which is pre-installed using US Fin boxes, so you can take flight with a “Stinger Foil” whenever desired.

All Stinger Boards include a bag for UV protection, a protective fin pouch, and two foil mount plugs for a smoother wave ride when not foiling.

SLC FOILBOARD

Sporty. And intuitive.

The all-new SLC Foilboard is your ticket to foil. Experience accessible high performance in a light, responsive, and durable platform. Get the feedback you need when you need it with the new SLC and feel how a tuned carbon foilboard elevates foil behaviour into an adrenaline-fueled performance. The proven 90mm extra long US BOX Track System is compatible with most foils and offers the maximum flexibility to adjust your ride.

What size should I choose? Board size depends on body weight and experience level. Lighter and more experienced foilers should consider smaller sizes.

Delivery:

Board comes with a full deck pad and kicker. 4 M8x30mm Torx screws and 4 T-nuts is included. Straps are optional.

Sizes:

115cm | 125cm | 135cm

Features:

• PVC CARBON SANDWICH: Strong. Lightweight. And responsive.
• BEVELED RAILS: Increased heel angle. Improved touchdown recovery.
• CHANNELS: Hull shape improves touchdown behavior.
• FOIL ROCKER: Balanced. Forgiving. And excellent feedback.
• STRAP READY: Stainless steel strap inserts for maximum durability.
• MAST BOX: 90mm Double US BOX Track System

Pair it with:

SLC Foil Mast

SLC Foil Wing

SLC Foil Set (Fuselage, Rear Stabalizer Wing, Mast Base)

Dimensions: 220x91, 192 liters